Body panel anti-rust agent (wax) application areas

HINT: 1) Apply anti-rust agent (wax) around the hinges whenever adjusting the doors and hoods. 2) Even if partially repairing a part, apply anti-rust agent (wax) over the entire application area ...

Body panel anti-chipping paint application areas

HINT: 1) Anti-chipping paint should be applied to some areas before the second coat and to other areas after the top coat. 2) Wipe off the paint immediately with a rag soaked in silicone remover if ...

See also:

If your vehicle will not start
(a) Simple checks Before making these checks, make sure you have followed the correct starting procedure given in “How to start the engine” in Section 3 and that you have sufficient fuel. I ...

Foamed material application areas
The sections shown in the figure below are filled with foamed material to provide noise insulation. Refill with foamed materials after repairing these sections and their surrounding sections. HI ...

Before starting the engine
1. Check the area around the vehicle before entering it. 2. Adjust seat position, seatback angle, head restraint height and steering wheel angle. 3. Adjust inside and outside rear view mirrors. 4 ...